Strength of Cylinders Containing Radial or Offset Cross-Bores-Reference-Cited by-同舟云学术

Strength of Cylinders Containing Radial or Offset Cross-Bores

Published:1976-12 Issue:6 Volume:18 Page:279-286
ISSN:0022-2542
Container-title:Journal of Mechanical Engineering Science
language:en
Short-container-title:Journal of Mechanical Engineering Science

Author:

Cole B. N.¹,Craggs G.²,Ficenec I.³

Affiliation:

1. Head of the Department of Mechanical Engineering, The University of Leeds. Fellow of the Institution.

2. Department of Mechanical Engineering, The University of Leeds. Member of the Institution.

3. Engineer, Clarke Chapman—John Thompson Ltd, Rodley, Leeds. Graduate of the Institution.

Abstract

The introduction of a small transverse opening or cross-bore into the wall of a cylindrical pressure vessel is sometimes necessary. Under static conditions such a cross-bore may have little effect on the bursting pressure of a plain cylinder, but under cyclic stress conditions, the fatigue life of the vessel is severely reduced. If the cross-bore axis is offset from the radial centre-line of the cylinder, then the fatigue life of such a vessel is shown to be substantially greater than that of a similar vessel containing a radial cross-bore.

Publisher

SAGE Publications

Subject

General Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/JMES_JOUR_1976_018_045_02

Reference23 articles.

1. Strategy for Cross-Bores in High Pressure Containers

2. Hetenyi M. Handbook of experimental stress analysis 1950, 636 (J. Wiley & Sons Inc., New York).

3. Nadai A. Theory of flow and fracture of solids 1950 1, 181 (McGraw-Hill, New York).

4. The Flow and Fracture of a Brittle Material

Cited by 10 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Cross bore geometry configuration effects on stress concentration in high-pressure vessels: a review;International Journal of Mechanical and Materials Engineering;2019-05-28

2. A Study of the Residual Stress Distribution in an Autofrettaged, Thick-Walled Cylinder With Cross-Bore;Journal of Pressure Vessel Technology;2004-11-01

3. TRANSITION, CONVERGENCE AND CONSTANCY IN RADIUSED ENTRY CROSS-BORED CYLINDERS;Transactions of the Canadian Society for Mechanical Engineering;2004-06

4. Geometric Constants in Plain Cross-Bored Cylinders;Journal of Pressure Vessel Technology;2003-11-01

5. High-Pressure Technology;Ullmann's Encyclopedia of Industrial Chemistry;2000-06-15