Affiliation:
1. University of Minnesota—Twin Cities Minneapolis, Minnesota, USA
Abstract
The enhancement of vibration signals by the addition of a random signal component was investigated. Vibration measurements during end-milling were made using an accelerometer mounted on the workpiece. A large number of tests were run with varying spindle speed, table speed, axial depth of cut, radial depth of cut and tool condition. Vibration signal frequency spectra were dominated by the cutting edge passing frequency, and so individual cutting edge effects such as cutting edge chipping or differences in amount of edge wear could not be identified easily. Similarly, machine characteristics such as spindle runout were overshadowed in vibration spectra by the dominant cutting edge passing frequency. To enhance the low-level signal components, a signal analysis procedure was constructed in which random components were added to accelerometer signals, a threshold signal level set and frequency spectra calculated from signal components exceeding the threshold. Enhancement of spectra peaks associated with low-level signal components was demonstrated. The effects of measurement system threshold level and added noise level on signal enhancement were determined.
Subject
Industrial and Manufacturing Engineering,Mechanical Engineering
Reference28 articles.
1. Shteinhauz G., Braun S., Lenz E. Automated vibration based tool wear monitoring: Application to face milling. In Proceedings of ASME International Computers in Engineering Conference, 1984 pp. 401–406 (American Society of Mechanical Engineers, New York).
2. In-Process Monitoring of Tool Wear Stage by the Frequency Band-Energy Method
3. A Data Dependent Systems Strategy of On-Line Tool Wear Sensing
4. Monitoring End-Mill Wear and Predicting Tool Failure Using Accelerometers
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献