Features of the stress field at the surface of a flush shrink-fit shaft-Reference-Cited by-同舟云学术

Features of the stress field at the surface of a flush shrink-fit shaft

Published:2009-06-02 Issue:10 Volume:223 Page:2241-2247
ISSN:0954-4062
Container-title:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

Author:

Paynter R J H¹,Hills D A¹,Barber J R²

Affiliation:

1. Department of Engineering Science, University of Oxford, Oxford, UK

2. Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan, USA

Abstract

The state of stress induced by a shrink-fitted circular shaft in an elastically similar half-space, positioned so that the end of the shaft is flush with the remainder of the free surface, is studied. At deep interior points the classical plane strain (Lamé) solution obtains, and the transition to the free surface state is found. It is found that a residual interfacial axial shear develops and the coefficient of friction needed to ensure adhesion along the interface is found. The effect of slip when a lower coefficient of friction is present is also found as a solution to an integral equation.

Publisher

SAGE Publications

Subject

Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/09544062JMES1403

Reference7 articles.

1. The effect of path cut on Somigliana ring dislocation elastic fields

2. On eigenstresses in a semi-infinite solid

3. The effect of path cut on Somigliana ring dislocations in a half-space

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. The axisymmetric shrink fit problem subjected to torsion;International Journal of Engineering Science;2020-05

2. Experimental and numerical analysis of the assembly and disassembly of an interlocking joint with large diameter pipe applications;Tunnelling and Underground Space Technology;2020-04

3. Simplified Lamé’s equations to determine contact pressure and hoop stress in thin-walled press-fits;Thin-Walled Structures;2019-05

4. The axisymmetric shrink fit problem subjected to axial force;European Journal of Mechanics - A/Solids;2018-07

5. Theoretical and experimental studies for wind turbine’s shrink disk;Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science;2014-05-07