Computation of a modified Haigh-Goodman diagram for damage tolerant design for infinite fatigue life-Reference-Cited by-同舟云学术

Computation of a modified Haigh-Goodman diagram for damage tolerant design for infinite fatigue life

Published:2007-05-01 Issue:5 Volume:221 Page:619-623
ISSN:0954-4062
Container-title:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

Author:

Gänser H-P¹,Leitgeb A²,Glinsner K³,Eichlseder W¹²

Affiliation:

1. Chair of Mechanical Engineering, University of Leoben, Leoben, Austria

2. Christian Doppler Laboratory for Fatigue Analysis, University of Leoben, Leoben, Austria

3. Power Pack Design, BRP-Rotax GmbH, Gunskirchen, Austria

Abstract

A method for constructing a modified Haigh-Goodman diagram for flawed components is proposed based on the approximation by El Haddad for the crack growth threshold diagram, taking into account the influence of the stress ratio on the fatigue limit of the unflawed material as well as on the linear-elastic crack growth threshold. The modified Haigh diagram uses a minimum of easily obtainable material parameters and permits an easy application of damage tolerant design concepts when dimensioning for infinite fatigue life.

Publisher

SAGE Publications

Subject

Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/0954406JMES616FT

Reference11 articles.

1. On the use of the Goodman diagram for high cycle fatigue design

2. The effect of material hardness and mean stress on the fatigue limit of steels containing small defects

3. Prediction of non propagating cracks

Cited by 4 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Analysis and visualization of traceless symmetric tensors. Application to the Hencky strain tensor for large strain tension–torsion;International Journal of Non-Linear Mechanics;2022-10

2. About the fatigue crack propagation threshold of metals as a design criterion – A review;Engineering Fracture Mechanics;2016-03

3. Modified NASGRO Equation for Short Cracks and Application to the Fitness-for-purpose Assessment of Surface-treated Components;Procedia Materials Science;2014

4. The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel® 718 components;Materials Science and Engineering: A;2013-11