Turning particulate metal matrix composites: Experimental study of the evolution of the cutting forces, tool wear and workpiece surface roughness with the cutting time-Reference-Cited by-同舟云学术

Turning particulate metal matrix composites: Experimental study of the evolution of the cutting forces, tool wear and workpiece surface roughness with the cutting time

Published:2001-03-01 Issue:3 Volume:215 Page:371-376
ISSN:0954-4054
Container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Author:

Davim J P¹

Affiliation:

1. University of Aveiro Department of Mechanical Engineering Campus Santiago, 3810–193 Aveiro, Portugal

Abstract

This paper presents an experimental study of the evolution of the cutting forces, tool wear and surface roughness during the turning of the particulate metal matrix composite A356/20/SiCp-T6. The experimental work was developed through the continuous measurement of the cutting forces with an appropriate piezoelectric dynamometer. The wear type was identified and its evolution with cutting time was measured. Inserts with polycrystalline diamond (PCD) were tested. The surface roughness was evaluated with a profilometer.

Publisher

SAGE Publications

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/0954405011515433

Reference9 articles.

1. Taya M., Arsenault R. Metal Matrix Composites, 1989, pp. 1–9 (Pergamon Press).

2. Clyne T., Withers P. An introduction to metal matrix composites. Camb. Solid State Sci. Ser., 1995, 1–10.

3. Machinability of Particulate Aluminium Matrix Composites

4. Lane G. The effect of different reinforcement on PCD tool life for aluminium composites. In Proceedings of Machining of Composite Materials Symposium, ASM Materials Week, Chicago, Illinois, 1992, pp. 3–15.

Cited by 36 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Electrical discharge machining of polycrystalline diamond: A review;Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture;2022-11-25

2. Influence of processing conditions and issues in Machining of aluminum metal matrix composites;Materials Today: Proceedings;2021

3. Advances in machining of particulate-reinforced metal matrix composites;Advanced Machining and Finishing;2021

4. An investigation of influence of cutting parameters on three-dimensional surface topography in micromilling SiCp/Al composites;Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture;2020-11-17

5. An analytical model for force prediction in micromilling silicon carbide particle–reinforced aluminum matrix composites;Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture;2020-06-07