A study of non-redirection louvre fin-and-tube heat exchangers-Reference-Cited by-同舟云学术

A study of non-redirection louvre fin-and-tube heat exchangers

Published:1998-01-01 Issue:1 Volume:212 Page:1-14
ISSN:0954-4062
Container-title:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

Author:

Wang C-C¹,Chang Y-P²,Chi K-Y²,Chang Y-J¹

Affiliation:

1. Industrial Technology Research Institute Energy and Resources Laboratories Hsinchu, Taiwan

2. Chung Yuan Christian University Department of Mechanical Engineering Chung Li, Taiwan

Abstract

Extensive experiments on the heat transfer and pressure drop characteristics of louvre finand-tube heat exchangers were carried out. In the present study, 14 samples of non-redirection louvre fin-and-tube heat exchangers with different geometrical parameters, including the number of tube row, fin pitch and tube size, were tested in a wind tunnel. Results are presented as plots of the Fanning friction factor f and the Colburn j factor against Reynolds number based on the tube collar diameter in the range of 300–8000.

Publisher

SAGE Publications

Subject

Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/0954406981520999

Reference17 articles.

1. A generalized heat transfer correlation for Iouver fin geometry

2. An experimental study of heat transfer and friction characteristics of typical louver fin-and-tube heat exchangers

3. ASHRAE Handbook Fundamental, SI Edition, 1993, Ch. 13, pp. 14–15 (American Society of Heating, Refrigerating and Air-conditioning Engineers, Inc., Atlanta, Georgia).

4. Describing the uncertainties in experimental results

Cited by 22 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. A critical review on Colburn j-factor and f-factor and energy performance analysis for finned tube heat exchangers;Energy;2024-01

2. Thermodynamic assessment and optimization on louver fin with non-uniform arrangement at different tube rows by desirability approach;Thermal Science and Engineering Progress;2023-07

3. Numerical investigation of slit fin at different Reynolds numbers: A sensitivity analysis and optimization by Taguchi methodology;International Communications in Heat and Mass Transfer;2022-11

4. Heat transfer enhancement in fin-and-tube heat exchangers – A review on different mechanisms;Renewable and Sustainable Energy Reviews;2021-03

5. A new three-dimensional CFD model for efficiency optimisation of fluid-to-air multi-fin heat exchanger;Thermal Science and Engineering Progress;2020-10