Pitting of Gears and Discs

Abstract

Pitting tests using 127 mm (5 in) centres distance gear rig under controlled conditions are described. These are compared with similar disc tests using the same materials and lubricants. Tests of both types confirm Dawson's conclusion that an important factor influencing pitting life is the ratio of surface roughness to the calculated lubricant film thickness. It has been shown that using a hunting tooth ratio, particularly when associated with a rough harder surface and a surface finish oriented normal to the motion, increases the likelihood of wear. Most importantly, the results show that using disc tests can greatly overestimate the pitting life of gears. These experiments and other evidence from the literature suggest that the most probable reason for these differences between gears and discs lies in dynamic gear loads.