EXPERIMENTAL STUDY OF HEAT EXCHANGE PROCESSES IN HEAT EXCHANGERS OF A NEW DESIGN FOR COOLING SUPPLY AIR IN POULTRY HOUSES WITH WATER FROM UNDERGROUND WELLS-Reference-Cited by-同舟云学术

EXPERIMENTAL STUDY OF HEAT EXCHANGE PROCESSES IN HEAT EXCHANGERS OF A NEW DESIGN FOR COOLING SUPPLY AIR IN POULTRY HOUSES WITH WATER FROM UNDERGROUND WELLS

Published:2023 Issue:6 Volume:70 Page:
ISSN:2223-0858
Container-title:Energy and automation
language:
Short-container-title:Energy and automation

Author:

Trokhaniak V.,Gorobets V.

Abstract

In this work, an experimental installation for cooling air in a poultry house was developed and manufactured using a new design of a heat exchanger-recuperator, in which water from underground wells is used as a cooling medium. The schematic diagram of the heat exchanger installation and device is described, and the characteristics of the measuring instruments are given. Experimental studies of heat exchange processes in the heat exchanger were carried out and the temperature distributions in the cold and hot coolants were determined, the Nusselt number and the heat transfer coefficient on the surface of the tube bundle were found. It is shown that the use of a new design of compact tube bundles makes it possible to increase the heat transfer coefficient by 33 %. Based on the statistical analysis, the results of numerical model calculations are compared with experimental data on the heat transfer of pipe bundles. The error obtained in the results of numerical modeling is slightly more than 5 %.

Publisher

National University of Life and Environmental Sciences of Ukraine

Reference14 articles.

1. Hojjat, M. (2020). Nanofluids as coolant in a shell and tube heat exchanger: ANN modeling and multi-objective optimization. Applied Mathematics and Computation, Vol. 365, 124710. doi: 10.1016/j.amc.2019.124710.

2. Bichkar, P., Dandgaval, O., Dalvi, P., Godase, R., Dey, T. (2018). Study of shell and tube heat exchanger with the effect of types of baffles. Procedia Manufacturing, Vol. 20, pp. 195-200. doi: 10.1016/j.promfg.2018.02.028.

3. Wang, C., Cui, Z., Yu, H., Chen, K., Wang, J. (2020). Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm. International Journal of Heat and Mass Transfer, Vol. 159, 120140. doi: 10.1016/j. ijheatmasstransfer.2020.120140.

4. Tayyab, M., Cheema, T.A., Malik, M.S., Muzaffar, A., Sajid, M.B., Park, C.W. (2020). Investigation of thermal energy exchange potential of a gravitational water vortex. Renewable Energy, Vol. 162, pp. 1380-1398. doi: 10.1016/j.renene.2020.08.097.

5. Alam, T., Kim, M.H. (2018). A comprehensive review on single phase heat transfer enhancement techniques in heat exchanger applications. Renewable and Sustainable Energy Reviews, Vol. 81, pp. 813-839. doi: 10.1016/j.rser.2017.08.060.