Affiliation:
1. Ivanovo State Power Engineering University
Abstract
The objectives of the present study included an analysis of statistical data on the failure causes of highvoltage equipment with a particular focus on current and voltage measuring transformers; a study of factors affecting the technical and functional condition of measuring transformers; a review of available methods for monitoring the technical condition of high-voltage electronic measuring transformers; the development of the basic principles of a stationary system for monitoring the technical capabilities of electronic measuring transformers. A review of available scientific publications and copyright objects on the aforementioned problems was conducted. The results were processed using the principles of systematic approach, as well as induction, deduction, classification and abstraction methods. The existing methods for monitoring the technical condition of high-voltage electronic measuring transformers were analyzed. The influence of various regimes and external factors on the technical and functional state of measuring transformers was investigated. The main principles for developing a stationary system for monitoring the technical condition of electronic measuring transformers were formulated. It was established that the failure of measuring transformers in medium voltage networks accounts for 6% of all failures. In 110 kV and higher-voltage networks, this level reaches 7%. It was found that the majority of accidents is associated with damaged insulation, poor-quality manufacturing and installation of the equipment, the impact of operating parameters and external factors on the technical and functional state of measuring transformers. Based on the considered methods for monitoring the technical condition of high-voltage equipment, a functional scheme of a stationary system for monitoring the technical capabilities of electronic measuring transformers at a digital substation is proposed.
Publisher
Irkutsk National Research Technical University
Reference69 articles.
1. Wang Yu-duo, Dai Xiao-miao. A Ethernet interface solution based on TCP/IP protocol. In: IEEE 11th Inter-national Conference on Signal Processing. 2012;1521-1525. https://doi.org/10.1109/ICoSP.2012.6491863.
2. Zhijian Qu, Mingguang Liu, Zhiling Jiang, Feng Wu, Jing Liu, Lichao Sun. Study of communication gateway based on IEC61850 Protocol. In: International Conference on Communication Software and Networks. 2009;659-662. https://doi.org/10.1109/ICCSN.2009.17.
3. Adamiak M., Baigent D. IEC 61850 Communication networks and systems i n substations: an overview for users. The Protection & Control Journal. 2009;61-68.
4. Chichev S.I., Kalinin V.F., Glinkin E.I. Designing methodology of a digital sub-station based on new technologies. Moscow: Spektr; 2014, 228 p. (In Russ.).
5. Chichev S.I., Kalinin V.F., Glinkin E.I. Information and measuring system of the electric grid company. Moscow: Spektr; 2011, 156 p. (In Russ.).