A Push-out Bond Strength Study and Interface Analysis of New Porous Titanium Dental Post Luted with Resin Cement

Abstract

This study aimed to compare the push-out bond strength (PBS) between a new porous titanium post (PTP) and other marketed dental posts cemented with two types of dual-cure resin cement. A total of 96 extracted single-rooted human teeth were recruited. Four types of dental posts (n = 24 each), namely: stainless steel post (SSP), commercially-pure titanium post (CTP), fibre glass post (FGP), and PTP were cemented with two types of resin cements (RelyX U200 and ParaCore) and then sectioned at coronal and middle root levels. The specimens were subjected to a PBS test at a crosshead speed of 0.5 mm/min. The interface analysis was performed using a stereomicroscope and scanning electron microscope. A p-value < 0.05 was considered significant for all statistical tests. PBS recordings showed that the highest PBS mean value in RelyX group was 2.68±1.10 MPa for PTP. The differences in PBS between PTP and SSP and FGP were not significant (p = 0.098 and p = 0.075, respectively). The null hypothesis for RelyX group at both coronal and middle sections of the root was retained (p > 0.05). No failure at the post-cement interface was found in the PTP group, which was founder superior over the other posts (no gap for this interface was observed). The PTP showed similar bonding strength and adhesion to the other tested posts when using RelyX U200 cement. The PTP can be considered a new alternative option for the dental post system.