UV photoelectrocatalytic degradation of m- cresol pollutant using TiO2 dip -coated stainless steel electrode system

Abstract

In the present study, the removal of m- cresol in an aqueous medium was studied by the photoelectrocatalytic (PEC) degradation by the TiO2 suspension on dip-coated stainless steel electrode under UV lamp of the wavelength of 352nm. The performance of the PEC method on the degradation of m- cresol was studied by made the comparison with the photocatalytic oxidation (PCO) method in terms of COD removal and kinetic study. In the PEC study on the degradation of m- cresol pollutant was studied by the various parameters such as initial concentration, pH, and the bias potential. The result found that the optimum degradation efficiency of m- cresol in the PEC and PCO methods were 79.6% and 39.8% at pH 5.0. The result showed that the kinetic constants (k) in the PEC and PCO methods were -0.0116 and -0.0058 under optimum conditions. The result found that the PEC method using TiO2 coated on stainless steel electrode is two times higher than the PCO method on the degradation of m- cresol.