Comparison of Ensemble and Base Learner Algorithms for the Prediction of Machining Induced Residual Stresses in Turning of Aerospace Materials

Abstract

Estimation of residual stresses is important to prevent the catastrophic failures of the components used in the aerospace industry. The objective of this work is to predict the machining induced residual stresses with bagging, boosting, and single-based machine learning models based on the design and cutting parameters used in turning of Inconel 718 and Ti6Al4V alloys. Experimentally measured residual stress data of these two materials was compiled from the literature including the surface material of the cutting tools, cooling conditions, rake angles as well as the cutting speed, feed, and width of cut to show the robustness of the models. These variables were also grouped with different combinations to clearly show the contribution and necessity of each element. Various predictive models in machine learning (AdaBoost, Random Forest, Artificial Neural Network, K-Neighbors Regressor, Linear Regressor) were then applied to estimate the residual stresses on the machined surfaces for the classified groups using the generated data. It was found that the AdaBoost algorithm was able to predict the machining induced residual stresses with the mean absolute errors of 18.1 MPa for IN718 alloy and 31.3 MPa for Ti6Al4V by taking into account all the variables while artificial neural network provides the lowest mean absolute errors for the Ti6Al4V alloy. On the other hand, linear regression model gives poor agreement with the experimental data. All the analyses showed that AdaBoost (boosting) ensemble learning, and artificial neural network models can be used for the prediction of the machining induced residual stresses with the small datasets of the IN718 and Ti6Al4V materials.