Durability Analysis in Seat Components based on Design Criteria-Reference-Cited by-同舟云学术

Durability Analysis in Seat Components based on Design Criteria

Published:2022-05-27 Issue: Volume: Page:
ISSN:2147-3129
Container-title:Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
language:en
Short-container-title:

Author:

BOLU Hüseyin Sertan¹,ÇAVUŞOĞLU Oktay¹,DİNDAR Çiğdem¹,AYDIN Hakan¹

Affiliation:

1. Bursa Uludağ Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü

Abstract

In this study, the suitability of the M1 class vehicle rear seat according to the ECE R17 luggage retention regulation has been examined. Strength and cost improvement studies were carried out on the seat corner component. The development studies for the seat to be tested according to the boundary and loading conditions specified by the ECE R17 regulation were created in the finite element method pre-processing software Hyper Mesh and the analysis was carried out in the RADIOSS solver. The design of the seat, which was determined by finite element analysis results, was verified by physical tests.

Publisher

Bitlis Eren Universitesi Fen Bilimleri Dergisi

Subject

Earth-Surface Processes

Reference16 articles.

1. [1] S. Sharma and S. K. Ghoshal, “Hydrogen the future transportation fuel: From production to applications,” Renew. Sustain. Energy Rev., vol. 43, pp. 1151–1158, 2015, doi: 10.1016/j.rser.2014.11.093.

2. [2] V. Singh and S. K. Sharma, “Fuel consumption optimization in air transport: a review, classification, critique, simple meta-analysis, and future research implications,” Eur. Transp. Res. Rev., vol. 7, no. 2, 2015, doi: 10.1007/s12544-015-0160-x.

3. [3] M. Gonçalves, H. Monteiro, and M. Iten, “Life Cycle Assessment studies on lightweight materials for automotive applications - An overview,” Energy Reports, vol. 8, pp. 338–345, 2022, doi: 10.1016/j.egyr.2022.01.067.

4. [4] A. Beaudet, F. Larouche, K. Amouzegar, P. Bouchard, and K. Zaghib, “Key challenges and opportunities for recycling electric vehicle battery materials,” Sustain., vol. 12, no. 14, pp. 1–12, 2020, doi: 10.3390/su12145837.

5. [5] A. Mayyas, A. Qattawi, M. Omar, and D. Shan, “Design for sustainability in automotive industry: A comprehensive review,” Renew. Sustain. Energy Rev., vol. 16, no. 4, pp. 1845–1862, 2012, doi: 10.1016/j.rser.2012.01.012.