Author:
CHWIST Mariusz,GRAB-ROGALIŃSKI Karol,SZWAJA Stanisław
Abstract
Pyrolysis oil obtained from thermal biomass processing (torrefaction and pyrolysis) was used as an additional fuel for the compression-ignition engine equipped with a classic (non-common rail) injection system. The basic fuel used to the engine was regular diesel fuel. The tests were carried out with two content of pyrolysis oil in diesel fuel as follows: 10 and 20% by volume. In addition, the combustion process was investigated in the engine operating only on pyrolysis oil. The test results were based on a comparative analysis, where the diesel fuel was used as the reference fuel. The obtained results indicate that is a real possibility of co-combustion of pyrolysis oil with diesel fuel in the CI engine. On the other hand, a decrease in engine power resulting from the lower calorific value of pyrolysis oil and a greater unrepeatability of engine consecutive work cycles were observed.
Publisher
Polish Scientific Society of Combustion Engines
Reference13 articles.
1. AMBROSEWICZ-WALACIK, M., DANIELEWICZ, T. Pyrolytic oil and petroleum fractions obtained by pyrolysis of vehicle tires as an energy sources for compression-ignition engines. Combustion Engines. 2015, 162(3), 952-957.
2. Production of fuel blends from diesel oil and waste products
3. BARBOOTI, M.M., MOHAMED, T.J., HUSSAIN, A.A., ABAS, F.O. Optimization of pyrolysis conditions of scrap tires under inert gas atmosphere. Journal of Analytical and Applied Pyrolysis. 2004, 72, 165-170.
4. Performance of a drop-in biofuel emulsion on a single-cylinder research diesel engine
5. BOXIONG, S., CHUNFEI, W., LIANG, C. et al. Pyrolysis of waste tyres: the influence of USY catalys/tyre ratio on products. Journal of Analytical and Applied Pyrolysis. 2006, 78, 243-249.
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献