Quality Analysis of Welds Made with an Automatic Battery Pack Spot Welding Machine

Abstract

This paper presents quality testing of battery pack welds for different welding time parameters of an automatic resistance spot welding machine. Several quality testing methods commonly used in studies of welded joints were described. Finally, the breakage test destructive method was chosen and used in this research. To investigate the influence of welder parameters on the quality of the welded joints, the programmable resistance spot welding machine was designed and constructed. As the studied samples, the 18650 cell type and the 8 mm × 0,15 mm cell packaging nickel plated steel tape were chosen as the most commonly used for the construction of battery packs for personal electric vehicles. The impact of each time constants set on the spot welding process was measured by the self-designed and constructed strength testing machine. After a series of tests with different parameters of spot welding process, the final conclusions were formulated.