Abstract
In this paper, the performance of a three-phase four wire shunt active power filter (APF) using indirect current control with active load current calculation was compared with that corresponding to using indirect current control with prescribed current calculation from the voltage controller. It is clear that, under balanced and sinusoidal voltage conditions, these two methods give similar results. The variant of the indirect current control with prescribed current calculation from the voltage controller has the advantage of simplicity, but exhibits increased sensitivity to voltage ripples on the compensation capacitor, as they are reflected in the output of the voltage controller. The whole system was modeled using MATLAB-SIMULINK software. The simulation results demonstrate the applicability of both methods for APF control.
Reference22 articles.
1. "[1] A. Bitoleanu, M. Popescu, C. V. Suru, Filtre active de putere. Fundamente și aplicații. Ed. Matrix, București, 2021.
2. [2] Z. Salam, T. P. Cheng, A. Jusoh, "Harmonics mitigation using active power filter: A technological review," Elektrika Journal of Electrical Engineering, vol. 8, no. 2, 2006, pp. 17-26.
3. [3] T. C. Green, J. H. Marks, "Control techniques for active power filters," IEE Proceedings - Electric Power Applications, vol. 152, issue 2, March 2005, pp. 369- 381.
4. [4] Y. Hoon, M. A. M. Radzi, M. K.Hassan, N. F.Mailah, "Control algorithms of shunt active power filter for harmonics mitigation: A review," Energies, 2017, 10, 2038, doi: 10.3390/en10122038.
5. [5] R. Rajagopal, K. Palanisamy, S. Paramasivam, "A technical re-view on control strategies for active power filters," 2018 Interna-tional Conf. on Emerging Trends and Innovations in Engineering and Technological Research, Ernakulam, 2018, pp. 1-6.