Analysis of Standard Time Calculations Using the Direct Stopwatch Time Study Method on Line Deburing Pt. Mikuni Indonesia

Abstract

Measuring working time is an attempt to determine the length of working time required by a trained employee to complete a job at a normal speed level. To increase work efficiency for employees, both time and energy, research was carried out to determine time Standard ds, time allowances and output Standard ds for the company, so that the production process runs better. In this research, the time for each process will be measured with a stopwatch, which will then be used to calculate cross-production balance. The results of the work measurement research on the deburing line show that the ideal planning that should be set by management for each product is 07K for 8 working hours, namely 987 pcs and 1233 for 10 working hours, 3DM for 8 working hours, namely 764 pcs and 955 for 10 Working hours, 01Y for 8 working hours, namely 868 pcs and 1085 pcs for 10 working hours, 01D for 8 working hours, namely 810 and 1012 pcs for 10 working hours, 01S for 8 working hours, namely 820 pcs and 1025 pcs for 10 working hours, 5SM for 8 working hours, namely 849 pcs and 1061 pcs for 10 working hours, 457 for 8 working hours, namely 294 pcs and 368 pcs for 10 working hours, 874 for 8 working hours, namely 784 pcs and 980 pcs for 10 working hours, and 908 1-C for 8 working hours, namely 634 pcs and 792 pcs for 10 working hours.