Affiliation:
1. Southwest State University
Abstract
Purpose of research. Experimental determination and analysis of the bearing capacity, deformability and crack resistance of a reinforced concrete floor slab supported on three sidesMethods. Testing a specimen of a reinforced concrete floor slab supported on three sides (loggia floor) by a controlled load simulating the operational one. Measurement of deflections. Analysis and justification of test resultsResults. The slab was loaded to a level of 325 kN or 20.1 kPa. This load exceeded the control load by a factor of 1.64 with a safety factor of 1.6, exceeded the design load by a factor of 2.64, and exceeded the standard load by a factor of 3.08. The maximum recorded deflection at maximum load was 3.01 mm in or in span fractions of 0.0009, which is 7.41 times less than the allowable deflection from the standard load - 0.00667 of the span length. The testing has been terminated for safety reasons.Conclusion. The points that could allow the developing of more economical building structures are: refinement of the design scheme for the operation of structures, the optimal choice of a finite element in the calculation, as well as the gradual inclusion in the sets of rules of methods for calculating building structures based on the theory of structural systems with distributed parameters at critical energy levels.
Publisher
Southwest State University
Subject
General Earth and Planetary Sciences,General Engineering,General Environmental Science
Reference19 articles.
1. Turkov A., Makarov А. А. Eksperimental'nye issledovaniya sistem perekrestnykh balok iz derevyannykh elementov na kvadratnom plane s razmerom yacheek 0,4kh0,4 m na dinamicheskie i staticheskie nagruzki pri izmenenii podatlivosti svyazei [Pilot studies of systems of cross beams from wooden elements on the square plan with a size of cells of 0,4х0,4 m for dynamic and static loadings at change of the pliability of communications]. Stroitel'stvo i rekonstruktsiya = Construction and Reconstruction. 2016, no. 6(68), pp. 51-56. EDN XBKCBH.
2. Konovalov A.M., Kugushev V.I., Yakovlev A. Yu. Rezul'taty eksperimental'nogo issledovaniya protsessa pereraspredeleniya energii sobstvennykh kolebanii pod vozdeistviem dempfiruyushchikh faktorov [The results of experimental studies of the process of redistribution of self-oscillation energy under the influence of attenuates]. Kontrol'. Diagnostika = Control. Diagnostics, 2019, no. 5, pp. 46-51. DOI 10.14489/td.2019.05. pp.046-051. EDN RNNJBT.
3. Mitasov V. M. Chkhum A. Deformirovanie zhelezobetonnykh balok s formoobrazuyushchimi elementami pri dlitel'nykh nagruzkakh [Deformation of reinforced concrete beams with forming elements under long-term loading]. Sovremennye naukoemkie tekhnologii = Modern Knowledge-intensive Technologies, 2018, no. 3, pp. 79-84. EDN YUZRZJ.
4. Akhramochkina Tatiana I. Teoreticheskie i eksperimental'nye issledovaniya stalezhelezobetonnykh konstruktsii s primeneniem gnutykh stal'nykh profilei [Theoretical and experimental studies of steel-reinforced concrete structures that have bent steel sections]. Stroitel'stvo: nauka i obrazovanie = Construction: Science and Education, 2021, vol. 11, no. 4, pp. 27-40. DOI 10.22227/2305-5502.2021.4.3. EDN AKOINX.
5. Akhramochkina T. I. Eksperimental'nye issledovaniya sily stsepleniya stal'noi otsinkovannoi plastiny i betona [Experimental studies of the adhesion force between a zinccoated steel plate and concrete]. Stroitel'stvo: nauka i obrazovanie = Construction: Science and Education. 2021, vol. 11, no. 2, pp. 1-16. DOI 10.22227/2305-5502.2021.2.1. EDN KBWBVW.