Ionization processes of negative corona discharge. Part 2. Theory. Comparison with experiment

Abstract

   The purpose of the research is a theoretical analysis of ionization processes in the air, which are initiated by a high-voltage field generated by the negative needle-flat electrode electrode system.   Methods. Fe, Cu, Al electrodes are used. Calculations are carried out using the methods of quantum mechanics and mathematical physics.   Results. The processes of cold and thermoelectron emission of electrons, enhanced by an external high-voltage field (Schottky emission), are analyzed. The conditions under which the generation of charges from the cathode surface due to plasma-chemical reactions and the capture of surface electrons by electronegative oxygen molecules are decisive are investigated. Based on the PE theory, a theory of injection of negative ions from the cathode into an electronegative gas is constructed and the theory is compared with experiment. It has been shown that at small radii of curvature of needle tips, when E ≥ 106 V/cm, the generation of charges is due to cold emission of electrons. In average fields E ≈ 105 V/cm, electron emission is due to the Schottky effect. In fields E ≈ 104 V/cm and below, injection is caused by electrochemical processes and PE capture. A theory has been developed for PEs that appear at electric field intensities on the electrode of the order of several tens of kV/cm, that is, on flat and slightly curved negative electrodes. The capture of PE by electron-withdrawing molecules causes an injection current and, as a consequence, the ignition of a corona discharge. Analytical expressions for the surface density as a function of the local electric field strength, as well as an expression for the injection current, are obtained. The agreement between theory and experiment is satisfactory.   Conclusion. An analysis of the development of CR on negative needles is given. A theory of PE at the cathode in strong electric fields was developed. Based on the results of measuring dark negative current-voltage characteristics, it is possible to determine the patterns of surface processes involving electronic transitions, in particular, determine the concentration of PE and injection currents.