Abstract
The creation of new and improvement of existing machines and mechanisms requires the development of drive engineering and the creation of new drive systems capable of competing with currently known circuit solutions. Under these conditions, the creation of combined pneumatic-mechanical drives is an important scientific and technical task. The purpose of this work is to increase the speed at a given accuracy of auxiliary movements of the target mechanisms of technological machines by creating a pneumatic-mechanical drive with improved energy and dynamic characteristics. The technical solution of a positioning pneumatic-mechanical drive of executive movements of technological equipment is presented, mathematical and computer models are developed. In this case, the method of solving the differential equation in the SimInTech program is used. As a result, an oscillogram of transients is obtained. The developed models allow for dynamic analysis of pneumatic-mechanical systems.
Publisher
Samara National Research University
Reference9 articles.
1. Energy Optimal Control of Servo-Pneumatic Cylinders Through Nonlinear Static Feedback Linearization
2. Dao The Anh. Pozitsionnyy pnevmoprivod povyshennogo bystrodeystviya i tochnosti. Dis. … kand. tekhn. nauk [Positioning pneumatic actuator of increased speed and accuracy. Thesis for a Candidate Degree (Engineering)]. Rostov-on-Don, 2016. 206 p.
3. Soft Robotics: Pneumatic Networks for Soft Robotics that Actuate Rapidly (Adv. Funct. Mater. 15/2014)
4. Simulation of pneumatic actuator position system for long stroke mounting movements
5. Dao T.A., Mazhidov R.N. Simulating the process of positioning an industrial robot pneumatic actuator. Molodezhnyy Nauchno-Tekhnicheskiy Vestnik. 2014. No. 6. (In Russ.)