Affiliation:
1. Department of Structural, Building and Geotechnical Engineering Politecnico di Torino Torino Italy
2. Department of Engineering and Architecture University of Parma Parma Italy
3. Department of Civil and Structural Engineering The University of Sheffield Sheffield UK
Abstract
AbstractThis work presents a coupled approach, based on Finite Fracture Mechanics (FFM), to preliminarily investigate hydraulic fracturing of rocks. The novelty of the criterion relies on the assumption of a finite crack extension and on the simultaneous fulfillment of a stress requirement and the energy balance. Two material constants are involved, namely, the tensile strength and the fracture toughness. The FFM unknowns are represented by the critical crack advance, which results a structural parameter and not a simple material one, and the breakdown pressure. The study investigates the longitudinal failure behavior of both impermeable and permeable rocks by supposing that growing cracks are loaded by a pressure proportional to that acting on the borehole wall. The stability growth of hydraulic fractures is discussed case by case. The approach is validated against experimental data available in the literature by considering the effect of rock permeability, fluid viscosity and flow rate.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献