Prediction model of browning inhibitor concentration and its optimal composition for mass processing of ready‐to‐eat fresh‐cut ‘Fuji’ apple (Malus domestica Borkh.) strains

Abstract

AbstractIn this study, we optimized the composition of the browning inhibitor for apples and established a prediction model for the browning inhibitor concentration in mass‐processed fresh‐cut apples based on electrical conductivity measurements. The “Fuji” apples that were harvested in Chungju, Korea, were used for this study. Vitamin C mixture (VCM) and trehalose (Tre) were used as browning inhibitors at a 4% ratio. The browning reaction under Δ3 of BI (browning index) for 5 days was defined as the target shelf‐life of the apple flesh. The ΔBI of VCM and Tre was lower than that of VCM by 4%. It is revealed that the electrical conductivity of the browning inhibitor was highly correlated with its concentration and the number of soaked apples. Finally, the regression of the conductivity was fitted as Y = −0.0024 (number of soaked apples) + 0.5111 (R2 = 0.9931). In the validation test, the conductivity must be maintained at 0.4373 S/m or higher to maintain the target anti‐browning level of Δ3 or less, which corresponded to ∼80% of the initial qualitative level after manufacture. The conductivity measurement of the browning inhibitor is suitable for monitoring and predicting its concentration in the mass processing of fresh‐cut apple production due to the convenience of this method.Practical ApplicationThe conductivity measurement of browning inhibitors can be applied not only to the mass processing of apple production but also to the anti‐browning treatment of other fruits and vegetables, due to the convenience of this method. From these research results, it is expected to derive a formula that can predict the concentration of browning inhibitors through simple experiments for other fruits or vegetables.