Influence of artificial and casting defects on fatigue strength of moulded components in Ti-6Al-4V alloy-Reference-Cited by-同舟云学术

Influence of artificial and casting defects on fatigue strength of moulded components in Ti-6Al-4V alloy

Published:2015-08-05 Issue:9 Volume:38 Page:1026-1041
ISSN:8756-758X
Container-title:Fatigue & Fracture of Engineering Materials & Structures
language:en
Short-container-title:Fatigue Fract Engng Mater Struct

Author:

Léopold G.¹,Nadot Y.¹,Billaudeau T.²,Mendez J.¹

Affiliation:

1. Département de Physique et de Mécanique des Matériaux; Institut PPrime, CNRS, Université de Poitiers, ENSMA, UPR 3346; Téléport 2, 1 avenue Clément Ader, BP 40109 86961 Futuroscope Chasseneuil Cedex France

2. AIRBUS, Zone Industrielle Andromède; Rue Henri Ziegler, BP D55-01 31700 Blagnac France

Publisher

Wiley

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

http://onlinelibrary.wiley.com/wol1/doi/10.1111/ffe.12326/fullpdf

Reference40 articles.

1. Fatigue of an aluminium cast alloy used in the manufacture of automotive engine blocks;González;Int. J. Fatigue,2013

2. High cycle fatigue damage mechanisms in cast aluminium subject to complex loads;Koutiri;Int. J. Fatigue,2013

3. Crack initiation and propagation of cast A356 aluminium alloy under multi-axial cyclic loadings;De-Feng;Int. J. Fatigue,2008

4. Casting defects and fatigue strength of a die cast aluminium alloy: a comparison between standard specimens and production components;Avalle;Int. J. Fatigue,2002

5. Influence of casting defects on fatigue crack initiation and fatigue limit of ductile cast iron;Collini;Procedia. Engng.,2011

Cited by 32 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Influence of Impeller Structure Parameters on the Hydraulic Performance and Casting Molding of Spiral Centrifugal Pumps;Water;2024-06-03

2. Probabilistic prediction of the size effect on the fatigue strength for variable length specimens of selective laser melted 316L stainless steel;International Journal of Fatigue;2024-05

3. Review of defects and their sources in as-built Ti6Al4V manufactured via powder bed fusion;The International Journal of Advanced Manufacturing Technology;2024-04-20

4. Numerical investigation of the influence of defects on the multiaxial fatigue strength of additively manufactured alloys;Procedia Structural Integrity;2024

5. Factors affecting the fatigue strength of additively manufactured Ti-6Al-4V parts;Welding in the World;2023-12-06