Structural integrity analysis of HDPE pipes for water supplying network-Reference-Cited by-同舟云学术

Structural integrity analysis of HDPE pipes for water supplying network

Published:2018-11-11 Issue:4 Volume:42 Page:792-804
ISSN:8756-758X
Container-title:Fatigue & Fracture of Engineering Materials & Structures
language:en
Short-container-title:Fatigue Fract Eng Mater Struct

Author:

Bouaziz Mohamed Ali¹²^ORCID,Guidara Mohamed Amine¹²,Schmitt Christian²,Hadj-Taïeb Ezzeddine¹,Azari Zitouni²,Dmytrakh Ihor³

Affiliation:

1. Laboratoire de Mécanique des Fluides Appliqués, Génie des Procédés et Environnement, Ecole Nationale d'Ingénieurs de Sfax; Université de Sfax; Sfax Tunisia

2. Laboratoire d'étude des microstructures et de mécanique des matériaux (LEM3); Ecole Nationale d'Ingénieurs de Metz; Metz France

3. Physical Fundamentals of Fracture and Strength of Materials in Aggressive Environments departement; Karpenko Physico-Mechanical Institute of National Academy of Sciences of Ukraine; 5 Naukova Street Lviv Ukraine

Publisher

Wiley

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

http://onlinelibrary.wiley.com/wol1/doi/10.1111/ffe.12951/fullpdf

Reference41 articles.

1. WHO 2015

2. Water hammer effects on a gray cast iron water network after adding pumps;Bouaziz;Eng Fail Anal,2014

3. Relationships between J-integral and the strain energy evaluated in a finite volume surrounding the tip of sharp and blunt V-notches;Berto;Int J Solids Struct,2007

4. A path independent integral and the approximate analysis of strain concentration by notches and cracks;Rice;J Appl Mech,1968

Cited by 9 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. A comprehensive review of polyethylene pipes: Failure mechanisms, performance models, inspection methods, and repair solutions;Journal of Pipeline Science and Engineering;2024-06

2. The Mechanical Behavior of High-Density Polyethylene under Short-Time Hydraulic Pressure Test;Engineering, Technology & Applied Science Research;2024-06-01

3. Using J-integral analysis to predict the failure of HDPE pipes under crack face load and internal pressure;Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science;2024-01-11

4. Finite-Element-Analysis-Based Study of a Failure Phenomenon in HDPE Pipes;Materials;2023-10-29

5. Recent advances in slow crack growth modeling of polyethylene materials;Materials & Design;2023-03