Fracture toughness characterisation of a glass fibre‐reinforced plastic composite-Reference-Cited by-同舟云学术

Fracture toughness characterisation of a glass fibre‐reinforced plastic composite

Published:2020-08-05 Issue:1 Volume:44 Page:3-13
ISSN:8756-758X
Container-title:Fatigue & Fracture of Engineering Materials & Structures
language:en
Short-container-title:Fatigue Fract Eng Mater Struct

Author:

Vantadori Sabrina¹^ORCID,Carpinteri Andrea¹^ORCID,Głowacka Karolina²^ORCID,Greco Fabrizio³^ORCID,Osiecki Tomasz⁴,Ronchei Camilla³^ORCID,Zanichelli Andrea¹^ORCID

Affiliation:

1. Department of Engineering & Architecture University of Parma Parma Italy

2. Faculty of Mechanical Engineering Opole University of Technology Opole Poland

3. Department of Civil Engineering University of Calabria Arcavacata di Rende Italy

4. Faculty of Mechanical Engineering Chemnitz University of Technology Chemnitz Germany

Publisher

Wiley

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1111/ffe.13309

Reference53 articles.

1. Delamination resistance of GFRP‐epoxy rods with nanoparticle‐ and microparticle‐modified matrix and its correlation with the fracture properties of epoxy nanocomposites

2. Experimental investigation and damage simulation of large-scaled filament wound composite pipes

3. Mechanical properties of short basalt fibre reinforced polypropylene and the effect of fibre sizing on adhesion

4. A phenomenological study of the mechanical properties of long-fiber filled injection-molded thermoplastic composites

Cited by 24 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Mechanism-Based Modeling of Strain Rate–Dependent Transition of Macromechanical Behavior Accompanied by Temperature Rise Effects of a Toughened Polymer Composite;Journal of Engineering Mechanics;2024-05

2. Numerical modeling of blast-induced rock fragmentation in deep mining with 3D and 2D FEM method approaches;Journal of Rock Mechanics and Geotechnical Engineering;2024-05

3. Influence of co-deposition modification on mode I and II interlaminar toughness of epoxy laminates interleaved with waste textiles using experimental measurement and finite element technique;Theoretical and Applied Fracture Mechanics;2024-04

4. Failure analysis and evaluation for cracked concrete beam reinforced with CFRP;Theoretical and Applied Fracture Mechanics;2024-02

5. Experimental and combined finite-discrete element simulation of the fracture behaviour of a rigid polyurethane foam;Engineering Fracture Mechanics;2024-02