Design and Manufacturing of High Surface Area 3D-Printed Media for Moving Bed Bioreactors for Wastewater Treatment-Reference-Cited by-同舟云学术

Design and Manufacturing of High Surface Area 3D-Printed Media for Moving Bed Bioreactors for Wastewater Treatment

Published:2017-04 Issue:1 Volume:160 Page:144-156
ISSN:1936-7031
Container-title:Journal of Contemporary Water Research & Education
language:en
Short-container-title:Journal of Contemporary Water Research & Education

Author:

Elliott Olivia¹,Gray Stephanie²,McClay Michael²,Nassief Bakr²,Nunnelley Ann¹,Vogt Eric¹,Ekong Joseph²,Kardel Kamran³,Khoshkhoo Ali²,Proaño Gabriel²,Blersch David M.¹,Carrano Andres L.²

Affiliation:

1. Department of Biosystems Engineering; Auburn University; Auburn AL USA

2. Department of Industrial and Systems Engineering; Auburn University; Auburn AL USA

3. Department of Manufacturing Engineering; Georgia Southern University; Statesboro GA USA

Publisher

Wiley

Subject

General Medicine

Link

http://onlinelibrary.wiley.com/wol1/doi/10.1111/j.1936-704X.2017.03246.x/fullpdf

Reference49 articles.

1. American Public Health Association (APHA) 2012 Standard Methods for the Examination of Water and Wastewater https://www.standardmethods.org/

2. Barrett , M. 2013 Biomedia

3. Successional development of biofilms in moving bed biofilm reactor (MBBR) systems treating municipal wastewater;Biswas;Applied Microbiology and Biotechnology,2014

4. Customized 3D-printed surface topography governs species attachment preferences in a fresh water periphyton community;Blersch;Algal Research,2017

5. Procedure to quantify biofilm activity on carriers used in wastewater treatment systems;Bolton;Journal of Environmental Engineering,2006

Cited by 60 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. 3D printed monolithic microfluidic device with an integrated porous filter: Application to pH measurement of water;Talanta Open;2024-08

2. Triply periodic minimal surface based lattices for acoustic performance;Noise & Vibration Worldwide;2024-07

3. Enhancement of simultaneous nitrification denitrification (SND) and simultaneous nitrification-anammox-denitrification (SNAD) via 3D printed carriers: Insights into critical factors, functional microbes, and potential solutions;Journal of Cleaner Production;2024-06

4. Biofilm formation monitoring using SEM in synthetic wastewater pollutant removal by combination of DAF and modified MBBR;Ain Shams Engineering Journal;2024-05

5. 3D bioprinting in bioremediation: a comprehensive review of principles, applications, and future directions;PeerJ;2024-02-08