Residual thermal stress of SiC/Ti3 SiC2 /SiC joints calculation and relaxed by postannealing-Reference-Cited by-同舟云学术

Residual thermal stress of SiC/Ti3 SiC2 /SiC joints calculation and relaxed by postannealing

Published:2018-03-30 Issue:5 Volume:15 Page:1157-1165
ISSN:1546-542X
Container-title:International Journal of Applied Ceramic Technology
language:en
Short-container-title:Int J Appl Ceram Technol

Author:

Zhou Xiaobing¹²^ORCID,Li Youbing¹,Li Yifan¹,Liu Zhen¹,Yang Hui¹,Ding Shurong³,Han Young-Hwan²,Lee Jaehyung²,Du Shiyu¹,Huang Qing¹^ORCID

Affiliation:

1. Engineering Laboratory of Specialty Fibers and Nuclear Energy Materials (FiNE); Ningbo Institute of Materials Technology and Engineering; Chinese Academy of Sciences; Ningbo China

2. School of Materials Science and Engineering; Yeungnam University; Gyeongsan Korea

3. Department of Aeronautics and Astronautics; Institute of Mechanics and Computational Engineering; Fudan University; Shanghai China

Funder

Natural Science Foundation of Zhejiang Province

National Natural Science Foundation of China

Chinese Academy of Sciences

National Key Research and Development Program of China

Publisher

Wiley

Subject

Materials Chemistry,Marketing,Condensed Matter Physics,Ceramics and Composites

Link

http://onlinelibrary.wiley.com/wol1/doi/10.1111/ijac.12900/fullpdf

Reference39 articles.

1. Handbook of SiC properties for fuel performance modeling;Snead;J Nucl Mater,2007

2. Elevated temperature strength enhancement of ZrB2-30vol% SiC ceramics by postsintering thermal annealing;Neuman;J Am Ceram Soc,2016

3. Electrical and thermal properties of sic ceramics sintered with yttria and nitrides;Kim;J Am Ceram Soc,2014

4. Silicon carbide composites as fusion power reactor structural materials;Snead;J Nucl Mater,2011

5. Joining of SiC-based materials for nuclear energy applications;Ferraris;J Nucl Mater,2011

Cited by 17 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. High‐strength SiC joints fabricated at a low‐temperature of 1400°C using a novel low activation filler of Praseodymium;Journal of the American Ceramic Society;2023-06-07

2. Brazing of Ti-coated SiC using a CoFeCrNiCu high entropy alloy filler via electric field-assisted sintering;Journal of Materials Research and Technology;2023-03

3. Synthesis of Ti3SiC2 coatings onto SiC monoliths from molten salts;Journal of the European Ceramic Society;2022-10

4. Near-seamless joining of Cf/SiC composites using Y3Si2C2 via electric field-assisted sintering technique;Journal of Advanced Ceramics;2022-07-18

5. Joining of SiC using CoFeCrNiCuTi high entropy alloy filler by electric current field assisted sintering;Journal of the European Ceramic Society;2022-05