Effect of initial microstructure on surface relief and fatigue crack initiation in AISI 410 ferritic-martensitic steel-Reference-Cited by-同舟云学术

Effect of initial microstructure on surface relief and fatigue crack initiation in AISI 410 ferritic-martensitic steel

Published:2018-06-19 Issue:1 Volume:42 Page:61-68
ISSN:8756-758X
Container-title:Fatigue & Fracture of Engineering Materials & Structures
language:en
Short-container-title:Fatigue Fract Eng Mater Struct

Author:

Batista M.N.¹^ORCID,Marinelli M.C.¹,Alvarez-Armas I.¹

Affiliation:

1. Instituto de Física Rosario (IFIR), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET); Universidad Nacional de Rosario (UNR); Rosario Argentina

Funder

Agencia Nacional de Promoción Científica y Tencológica

Consejo Nacional de Investigaciones Científicas y Técnicas

Publisher

Wiley

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

http://onlinelibrary.wiley.com/wol1/doi/10.1111/ffe.12868/fullpdf

Reference16 articles.

1. Ferritic/martensitic steels-overview of recent results;Klueh;J Nucl Mater,2002

2. Cyclic instability of martensite laths in reduced activation ferritic/martensitic steels;Armas;J Nucl Mater,2004

3. Mechanical and microstructural behavior of isothermally and thermally fatigued ferritic/martensitic steels;Armas;J Nucl Mater,2002

4. On the cyclic softening mechanisms of reduced activity ferritic/martensitic steels;Giordana;Steel Res Int,2012

5. Microstructure evolution during cyclic tests on EUROFER 97 at room temperature. TEM observation and modelling;Giordana;Mater Sci Eng A,2012

Cited by 16 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Effects of temperature and strain amplitude on low-cycle fatigue behavior of 12Cr13 martensitic stainless steel;Journal of Materials Research and Technology;2024-03

2. Influence of post-processing heat-treatment on the mechanical performance of AISI 410L stainless steel manufactured by the L-DED process;Journal of Laser Applications;2023-10-30

3. Cyclic stress response and microcrack initiation mechanism of modified 9Cr‐1Mo steel under low cycle fatigue at room temperature and 350°C;Fatigue & Fracture of Engineering Materials & Structures;2023-03-31

4. Effect of microstructure on slip-induced crack initiation and early propagation of martensitic steel during high cycle fatigue;International Journal of Fatigue;2023-02

5. The investigation of fracture characteristics and process optimization of low-cycle fatigue cropping by using an AET-based multi-sensor system;The International Journal of Advanced Manufacturing Technology;2023-01-06