In situ study of microstructural evolution of borosilicate glass–sulfate mixture at high temperatures

Abstract

AbstractMicrostructural evolution of borosilicate glass–sulfate (BaSO4 or Na2SO4) mixture was observed in situ using a high‐temperature confocal scanning laser microscope. The phase compositions and sulfate retention of the mixture at different temperatures were also examined. The results indicate that for the glass–BaSO4 sample (abbreviated as BS), the borosilicate glass begins to melt at about 900°C, and the triangular BaSO4 crystals grow obviously between 900°C and 1100°C. At temperatures above 1100°C, the BaSO4 crystals gradually melt and decompose. For the glass–Na2SO4 sample (abbreviated as NS), strip‐shaped BaSO4 crystals begin to form at about 820°C after the borosilicate glass melting, and then gradually melt with further increasing temperature. When the temperature increases to 1000°C, the upper layer of the NS sample possesses Na2SO4, LiNaSO4, and BaSO4 phases, while the lower layer possesses an amorphous phase. Moreover, the SO3 retention in the BS sample remains almost unchanged with temperature increases from 900°C to 1100°C, and then decreases with further increasing temperature. The SO3 retention retained in the NS sample decreases rapidly at temperatures above 900°C. These findings can provide a guidance for vitrifying sulfur‐rich high‐level liquid waste.