Experimental study of the progressive collapse mechanism of excavations retained by cantilever piles

Abstract

An increasing number of catastrophic progressive collapses of deep excavations have occurred throughout the world. However, the research on progressive collapse mechanisms is limited. In this paper, two categories of model tests were conducted to investigate the mechanism of partial collapse (sudden failures of certain retaining piles) and progressive collapse. The model test results show that partial collapse can cause a sudden increase in the bending moments of adjacent piles via an arching effect. The load-transfer coefficients are defined to be equal to the peak increase ratios of the maximum bending moments in adjacent piles (peak moments caused by collapse over the values before the collapse). When the maximum load-transfer coefficient is larger than the bearing capacity safety factor of the piles, the partial failure will lead to progressive collapse. The influential factors of the progressive collapse mechanism, such as the partial collapse extent, excavation depth, and capping beam, were also investigated. During progressive collapse, the previous failed pile could cause new stress arching; simultaneously, the soil behind certain nearest intact piles could become loosened and destroy the arch springing of the stress arching, causing the progressive collapse to cease gradually.