In situ equilibrium pore-water pressures derived from partial piezoprobe dissipation tests in marine sediments

Abstract

Excess pore-water pressure has a significant effect on submarine slope stability and sediment deformation, and therefore its in situ equilibrium measurement is crucial in carrying out accurate slope stability assessments and accurately deriving geotechnical design parameters. In situ equilibrium pore-water pressure is usually obtained from pore pressure decay during piezocone tests. However, submarine shelves and slopes are often characterized by the existence of low-permeability (fine-grained) sediments involving long dissipation tests that are an important issue for offshore operational costs. Consequently, short-term and (or) partial dissipation tests are usually performed and in situ equilibrium pore-water pressures are predicted from partial measurements. Using a modified cavity expansion approach, this paper aims to predict for four different sites the in situ equilibrium pore-water pressures. Comparisons between predicted and observed in situ equilibrium pore-water pressures allowed the development of a guide to evaluate the minimum time required to perform short-term dissipation tests for a given marine sediment. The main finding of this Note is that the second derivative of the pore pressure, u, versus the logarithm of time, t, ∂2u/∂ln(t)2 must be positive to calculate accurately the in situ equilibrium pore-water pressures from partial measurements.