Author:
Ismael Nabil F.,Jeragh Abdul Majeed
Abstract
The results of a recent in situ testing program to establish standard penetration test – cone penetration test (SPT–CPT) correlation for the windblown calcareous desert sands of Kuwait are presented and analyzed. The program consisted of auger borings and static cone tests at five sites along a 35 km long corridor. The resulting correlation was employed for prediction of the allowable soil pressure of footings at seven sites in Kuwait where load tests were carried out on square concrete footings placed at a depth of 1 m below ground surface. A comparison of the measured to the predicted soil pressures using the Schmertmann method indicated very close agreement. The average ratio of measured to predicted soil pressure is 93% for the seven test sites. Recommendations are made for further testing to determine the long-term settlement components due to creep and cyclic loading. Key words: load tests, sands, footings, allowable pressure, settlement, field tests, borings, cone penetration tests.
Publisher
Canadian Science Publishing
Subject
Civil and Structural Engineering,Geotechnical Engineering and Engineering Geology
Cited by
11 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献