Influence of a rigid cap on thermo-mechanical behavior of nonsymmetrical thermally loaded energy pile group in clay

Abstract

This paper presents the results of a series of cyclic nonsymmetrical thermally loaded model-scale tests conducted on floating pile groups, with and without a rigid cap in saturated clay. The energy pile in each group was subjected to 10 two-way (heating–cooling) thermal cycles with an amplitude of 15 °C to investigate the potential effects of a rigid cap on the thermomechanical behavior of energy pile groups. It was found that the rigid cap restrained the expansion/contraction of the energy pile in response to temperature change and reduced its irreversible settlement, resulting in a lower differential settlement between the energy and nonenergy piles. Consequently, a lower tilting was observed in the pile group with a rigid cap. In addition, the thermally induced axial load was significantly increased (especially in cooling mode) due to the restriction of a rigid cap. The thermomechanical load transfer profile of the energy pile was also affected by it, resulting in the downward transmission of shaft resistance.