Affiliation:
1. University of Strathclyde, Glasgow, Scotland.
2. Università degli studi di Napoli Federico II, Napoli, Italy.
Abstract
The assessment of rainfall-induced shallow landslide hazards at the catchment scale poses a significant challenge. Traditional empirical approaches for landslide hazard assessment often assume that conditions having caused failure in the past will not change in the future. This assumption may not hold in a climate change scenario. Physically based models (PBMs) therefore represent the natural approach to include changing climate effects. PBMs would in principle require the combination of a three-dimensional (3-D) mechanical and water-flow model. However, a full 3-D finite element model at the catchment scale, with relatively small elements required to capture the pore-water pressure gradients, would have a significant computational cost. For this reason, simplifications to the mechanical (i.e., infinite slope) and water-flow models (i.e., one-dimensional or hybrid 3-D) are introduced, often based on a priori assumptions and not corroborated by experimental evidence. The paper presents a methodology to build a PBM in a bottom-up fashion based on geological surveys and geotechnical investigation. The PBM is initially set as simple as possible and then moved to a higher level of complexity if the model is not capable of simulating past landslide events. The approach is presented for the case study of Sorrento Peninsula and two main landslide events recorded during the winter of 1996–1997.
Publisher
Canadian Science Publishing
Subject
Civil and Structural Engineering,Geotechnical Engineering and Engineering Geology
Cited by
18 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献