Stability of swelling clay embankments

Abstract

A common occurrence in cuts or fills of swelling soils is their reduction in strength with time. At the time of compaction, the clay generally has a high matrix suction. Correspondingly, it has a high strength and will stand at relatively steep side slopes. With time, the soil generally tends towards saturation and the matrix suction reduces towards zero. There is a reduction in total strength and if the gravitational forces are too large, the slope fails.During the past several years, numerous cut and fill slopes have been observed in the Regina area of Saskatchewan. Many of these slopes have remained stable for 4–6 years and then failed. There has been a 20 year history of observations on the Belle Plaine overpass west of Regina. Field and laboratory investigations have been conducted.With a knowledge of the geometry of the slope and failure plane, the simplified Bishop method of stability analysis was used to perform a 'back-analysis' to assess the shear strength parameters. The shear strength parameters from the laboratory program are compared with those calculated from the stability analyses. The analyses indicate that the peak shear strength parameters from triaxial tests on the softened Regina clay (i.e., c' = 5 kPa and [Formula: see text]), with the appropriate pore water pressures, give a factor of safety of 1 for the failed surface. The effect of spring thawing appears to be to produce the condition of most serious pore water pressures.