Hydrologic soil properties and application of a soil moisture model in a balsam fir forest

Abstract

An analysis of hydrologic soil properties and the prediction of volumetric soil water content during four summers have been done for a site located in the balsam fir (Abiesbalsamea (L.) Mill.) forest of the Lac Laflamme watershed. The hydrologic properties were used to identify three different soil layers, THIRSTY, a soil moisture model using the Penman evapotranspiration formula, was applied to predict daily volumetric water content of these layers. Predictions of soil moisture with the calibrated model were close to the observed data for the median layer (20–60 cm from the soil surface) and less accurate for the surface layer (0–20 cm) where important transpiration activities take place. The model appeared unreliable for predicting soil water content of the bottom layer (60–100 cm) which was often saturated by groundwater. The calibration of the model required modifications of the observed values of the available water content at field capacity and the relative root density factor and was adjusted with the crop coefficient of the Penman evapotranspiration formula. These modifications of observed physical parameters raise the question of the feasibility of extrapolating the model to other sites without extensive calibration. The high sensitivity to variations of the crop coefficient applied to the evapotranspiration equation indicated that a more physically based transpiration model, supported by field-oriented process studies, would be required to improve the model's performance.