Long-term investigation of a deep-seated creeping landslide in crystalline rock. Part I. Geological and hydromechanical factors controlling the Campo Vallemaggia landslide

Abstract

Slope movements of the deep-seated Campo Vallemaggia landslide in the southern Swiss Alps have been reported for over 200 years. Surface and borehole investigations of the unstable mass reveal an up to 300 m deep complex structure incorporating 800 million cubic metres of disturbed metamorphic rocks divided into blocks along primary fault zones. An average slide velocity of approximately 5 cm/year can be calculated from various monitoring data recorded between 1892 and 1995. Block movements primarily involve mechanisms relating to multiple shear surfaces, but in cases where slide blocks are constrained by other blocks, creep deformations are observed. Borehole investigations revealed the presence of artesian water pressures, which when integrated with inclinometer and surface geodetic data, helped to provide key insights into the underlying instability mechanisms. This paper reports the findings of an extensive mapping, geophysical, and monitoring investigation carried out over a 20 year period. Results from the analysis are presented with respect to the hydromechanical factors controlling the unstable mass, the significance of which were instrumental in resolving conflicts with regards to the slope mitigation measures required to stabilize the slope. In Part II (see companion paper, this issue), the stabilization works performed at Campo Vallemaggia and their effectiveness are presented.