Silicon Carbide/Polysilazane Composite: Effect of Temperature on the Densification, Phase, and Microstructure Evolution
-
Published:2022-01-24
Issue:1
Volume:22
Page:548
-
ISSN:2460-1578
-
Container-title:Indonesian Journal of Chemistry
-
language:
-
Short-container-title:Indones. J. Chem.
Author:
Fauzi Fiqhi,Noviyanto Alfian,Fitriani Pipit,Wibowo Amirudin,Sudiro Toto,Aryanto Didik,Rochman Nurul Taufiqu
Abstract
This paper reports a route to suppress the grain growth in silicon carbide (SiC) during its sintering by combining it with polysilazane (PSZ). SiC was mixed with PSZ in a 1:1 weight ratio and sintered at 1600, 1700, and 1800 °C in a hot-pressing furnace. A satisfactory density was obtained at sintering temperatures > 1600 °C. The grain sizes of the SiC/PSZ composites sintered at 1700 and 1800 °C were 112 and 125 nm, respectively. The grain shape of the SiC/PSZ composite sintered at 1700 °C was circular and mainly similar to the initial shape of the SiC powder. Grain shape accommodation was observed at a sintering temperature of 1800 °C. It is suggested that different sample shapes were affected by different liquid phase formations. Silicon oxynitride (Si2N2O) was formed and played an important role in densification and microstructure generation.
Publisher
Universitas Gadjah Mada
Subject
General Chemistry
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献