Chemical Flood with a Single Surfactant

Abstract

Abstract The goal of this work is to develop alkaline-surfactant-polymer (ASP) formulations for a shallow, clayey sandstone reservoir. Commercially available surfactants were used in the phase behavior study. The gas-oil-ratio (GOR) was low; the phase behavior and coreflood study was conducted with the dead oil. The surfactant formulation systems were tested in tertiary ASP core floods in reservoir rocks. Many surfactant formulations were identified which gave ultralow IFT, but the formulation with only one surfactant (at 0.5 wt% concentration) in presence of one co-solvent was selected for corefloods. The cumulative oil recovery was in the range of 94-96% original oil in place (OOIP) in the corefloods. The surfactant retention was low (0.15 mg/gm of rock) in spite of the high clay content. The study showed that 0.5 PV of ASP slug and 2700 ppm of the polymer were required to make the flood effective. The use of alkali and preflush of the soft brine helped minimize surfactant retention.