Successful Application of Co2 Foam Fracturing Enables Paradigm Shift in Stimulation Strategy of Kuwait Jurassic Depleted Reservoirs

Abstract

Abstract The first ever CO2 foam fracturing new technology in Kuwait Oil Company (KOC) history was executed flawlessly in late 2021. Three treatments were executed. Co2 Foam Fracturing proved its significant added value of improving productivity in deep depleted tight carbonate Jurassic reservoirs, enhance flow back, reduce water consumption and carbon emission, and enable early production plus improving operation efficiency and cost saving. The stimulation operation has proven to be a huge success for all multidisciplinary teams involved as preliminary results showed over 50-70% production increase compared to offset wells. The main challenges of acid fracturing stimulation in depleted reservoirs are the need for extended formation cleanup to flow back the injected fluids via prolonging Nitrogen lift that add higher operational costs and intervention operations. Therefore, energetic high foam efficiency frac fluid becomes essential to assist flowback and retrieve pumped frac fluids from reservoir. To tackle these challenges, Carbon Dioxide CO2 is pumped in liquid phase as energetic fluid together with normal frac fluids. Due to CO2 liquid nature, high foam efficiency can be reached (40 – 50%) at much lower friction losses. So, it enables achieving pumping frac at high rates and high foam efficiency. The main benefits of CO2 Foam frac are better fracture cleanup due to expansion of the stored compressed gas in the liquid CO2, fluid loss control that is provided by foam, minimized fracture conductivity damage, and the increase in hydrostatic pressure while pumping that translates to lower surface pressures during injection. The selected pilot well is in depleted deep tight carbonate reservoir area of North Kuwait Jurassic gas fields. The executed acid fracturing operation required close planning starting from Q1-2021. Many challenges faced from logistical issues, lack of infrastructure and CO2 resources for the multi-faceted operation due to COVID-19 pandemic limitations. These challenges were tackled ahead with the integration of technical and operations teams to bridge the knowledge gap and to enable executing the operation safely. The pilot well’s net incremental production gain is estimated at 50-70% compared to offset wells, with improved flowback and formation cleanup with less well intervention. The resulting time and cost savings as well as the incremental well productivity and better operation efficiency confirmed high perspectives for the implemented foam acid fracturing approach. Another two CO2 Foam acid fracturing wells were executed with good results too. This paper will demonstrate the value of CO2 foam fracturing in depleted reservoir and KOC experience post first application and its plans to expand CO2 Foam Fracturing application across KOC different fields.