Lost-Circulation Control for Formation-Damage Prevention in Naturally Fractured Reservoir: Mathematical Model and Experimental Study

Abstract

Summary Drill-in fluid loss is the most important cause of formation damage during the drill-in process in fractured tight reservoirs. The addition of lost-circulation material (LCM) into drill-in fluid is the most popular technique for loss control. However, traditional LCM selection is mainly performed by use of the trial-and-error method because of the lack of mathematical models. The present work aims at filling this gap by developing a new mathematical model to characterize the performance of drill-in fluid-loss control by use of LCM during the drill-in process of fractured tight reservoirs. Plugging-zone strength and fracture-propagation pressure are the two main factors affecting drill-in fluid-loss control. The developed mathematical model consists of two submodels: the plugging-zone-strength model and the fracture-propagation-pressure model. Explicit formulae are obtained for LCM selection dependent on the proposed model to control drill-in fluid loss and prevent formation damage. Effects of LCM mechanical and geometrical properties on loss-control performance are analyzed for optimal fracture plugging and propagation control. Laboratory tests on loss-control effect by use of different types and concentrations of LCMs are performed. Different combinations of acid-soluble rigid particles, fibers, and elastic particles are tested to generate a synergy effect for drill-in fluid-loss control. The derived model is validated by laboratory data and successfully applied to the field case study in Sichuan Basin, China.