Experimental Study of the Effect of Molecular Collision Frequency and Adsorption Capacity on Gas Seepage Flux in Coal

Abstract

Summary The differences in the transport behavior and adsorption capacity of different gases in coal play crucial roles in the evolution of coal permeability. Previous studies of coreflooding experiments failed to explain the mechanism of gas flow and have attributed the variation in gas seepage flux (flow rate) at the beginning of the experiment to the change in effective stress, while the differences in the microscopic properties of different gases, such as molar mass, molecular diameter, mean molecular free path, and molecular collision frequency, were ignored. To research the effect of these gas properties on seepage flux while circumventing the effective stress, coreflooding experiments with helium (He), argon (Ar), nitrogen (N2), methane (CH4), and carbon dioxide (CO2) were designed. The results show that the gas transport velocity in coal is affected by the combination of molecular collision frequency and dynamic viscosity, and the transport velocities follow the order of ν (CH4) > ν (He) > ν (N2) > ν (CO2) > ν (Ar). A permeability equation corrected by the molecular collision frequency is proposed to eliminate differences in the permeabilities measured with different gases. The adsorption of different gases on the coal matrix causes different degrees of swelling, and the adsorption-induced swelling strains follow the order of ε (CO2) > ε (CH4) > ε (N2) > ε (Ar) > ε (He). The reduction in seepage flux and irreversible alterations in pore structure caused by adsorption-induced swelling are positively correlated with their adsorption capacities. The gas seepage fluxes after adsorption equilibrium of coal follow the order of Q (He) > Q (CH4) >Q (N2) > Q (Ar) > Q (CO2). Like supercritical CO2 (ScCO2), conventional CO2 can also dissolve the organic matter in coal. The organic molecules close to the walls of the cleats along the direction of gas flow are preferentially dissolved by CO2, and the gas seepage flux increases when the dissolution effect on the cleat width is greater than that on adsorption swelling.