Affiliation:
1. Aramco Services Company
2. University of Louisiana at Lafayette
Abstract
Summary
Acoustic-velocity measurements are an important nondestructive way to investigate dynamic rock-mechanical properties. Water content and bedding-plane-induced anisotropy are reported to significantly affect the acoustic velocities of siliciclastic sandstones and laminated carbonates. This relationship in organic-rich shales, however, is not well-understood and has yet to be investigated. The mechanical properties of organic-rich shales are affected by changes in water content, laminations, total organic content (TOC), and microstructures. In particular, kerogen density that accompanies changes in the composition of the TOC during maturity can significantly influence the acoustic responses within source rocks.
To understand how these variables influence acoustic responses in organic shales, two sets of cores from the Eagle Ford shale were investigated: one set cut parallel to bedding and the other perpendicular to bedding. Textures of the samples from each set were characterized by use of computed-tomography (CT) scanning. Nuclear magnetic resonance (NMR) was used to measure the water content, and X-ray diffraction (XRD) to analyze the mineralogy. Scanning electron microscope (SEM) was also used to characterize the microstucture. Acoustic-velocity measurements were then made on each set at various confining pressures with the ultrasonic pulse-transmission technique.
The results show that confining pressure, water content, and laminations have significant impact on both compressional-wave (P-wave) and shear-wave (S-wave) velocity. Both velocities increase as confining pressure increases. Velocities measured from cores cut parallel to bedding are, on average, 20% higher than those cut perpendicular to bedding. Increasing water content decreases both velocities. The impact of water content on shear velocity was found to be significant compared with the response with compressional velocity. As a result, the water content was found to lower both Young's modulus and shear modulus, which is opposite to the reported results in conventional reservoir lithology. In addition, both P- and S-wave velocities show a linear decrease as TOC increases, and they both decrease with increasing of clay content. The mechanisms that lead to water-content alteration of rock-mechanical properties might be a combined result of the clay/water interaction, the chemical reaction, and the capillary pressure changes.
Publisher
Society of Petroleum Engineers (SPE)
Subject
Geotechnical Engineering and Engineering Geology,Energy Engineering and Power Technology
Cited by
18 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献