Miscible Displacement In the Weyburn Reservoir: A Laboratory Study

Author:

Huang S.S.1,Dyer S.B.1

Affiliation:

1. Saskatchewan Research Council

Abstract

Abstract Most Saskatchewan light and medium oil (LMO) reservoirs have reached their economic limit of production under current technology (primary and secondary recovery methods). The successful development of me miscible displacement process using CO2 and hydrocarbon gases will lead to a significant increase in Saskatchewan LMO reserves and substantially extend the production life of these pools. A laboratory study was conducted to evaluate the applicability of various solvents (including the potential source of CO2 extracted from flue gas) for the recovery of oil from a southeast Saskatchewan reservoir (Weybum). The physical, chemical, and phase behaviour (PVT) properties of the dead oil, reservoir fluid, and reservoir fluid with CO2 were determined. Slim tube tests were conducted for the Weyburn reservoir fluid with pure Cal, with wellhead gas from the Steelman gas plant, and with two impure CO2 gases (one containing 9.9. molCH4 and the other containing 5.1 mol % Ni 5.1 mol % CH4 in CO2 as contaminants) at various pressures and the reservoir temperature of 59 ºC. The tests were also carried out to determine the maximum amount of impurities in CO2 that can be tolerated for the miscible process. The minimum miscibility pressures (MMP) determined for the above four systems demonstrated that the miscible displacement process using pure CO2 or impure CO2 containing up to 9.9 mol % CH4 (contaminant) as a solvent is a promising enhanced oil recovery (EOR) technique for southeast Saskatchewan reservoirs. The MMPs' for these two systems are below the estimated reservoir fracture pressure. Carbon dioxide contaminated with 5.1 mol % N2 from flue gas and 5.1 mol % CH4 from the reservoir during recycling would require further purification to lower the MMP to an acceptable level. The wellhead gas from the Steelman gas plant is not a suitable EOR agent for the Weybum reservoir. Rising bubble (RBA) tests on the four reservoir fluid/solvent systems were conducted and the MMPs obtained from these systems were in good agreement with those obtained from slim tube experiments. The RBA test is much faster than the slim tube technique, requires only a small amount of fluids, and also allows direct visual observation of miscibility (vapourizing-gasdrive) development. The technique is thus considered to be superior to slim tube tests. Introduction Most Saskatchewan light and medium oil (LMO) reservoirs have reached their economic limit of production Under current technology (primary and secondary recovery methods)(1). The successful development of the miscible displacement process using CO2 and hydrocarbon gases will lead to significant increase in Saskatchewan LMO reserves and substantially extend the production life of these pools(2). Current industry interest in CO2 and hydrocarbon miscible flooding is high, as evidenced by the high level of activity in field testing worldwide(3). In spite of a general slowdown in enhanced oil recovery (EOR) during the last two years (the number of active US EOR projects decreased from 366 in 1988 to 295 in 1990s, oil production from the miscible projects showed a 113% increase by 49% (over the same period in 1988).

Publisher

Society of Petroleum Engineers (SPE)

Subject

Energy Engineering and Power Technology,Fuel Technology,General Chemical Engineering

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3