Analysis and Prediction of Microseismicity Induced by Hydraulic Fracturing

Abstract

Summary This paper presents an analysis of the stress and pressure changes caused by hydraulic fractures and evaluates the likelihood and causes of microseismic activity in the vicinity of the fracture. Along with the formation stresses, pressure, and properties, the analysis predicts where microseisms should occur in relation to the fracture and makes possible accurate interpretation of the significance of the microseismic events. The most important factor controlling the seismically active zone is the coupling of the fracturing pressure into the formation. Thus, liquid-saturated reservoirs experience much more widespread activity than do gas reservoirs. The analysis also shows that the fracture tip induces large shear stresses that result in a local zone of instability. Such a zone is the primary reason that microseisms accurately map out the length and height of the fracture, because considerable microseismic activity occurs around the tip as it propagates.