Author:
Meusel Manuel,Abdallah Amir A.,Turek Marko,Hagendorf Christian
Abstract
Half-cell and third-cell modules are the current module technology standard due to their enhanced electrical performance. Also, special module layouts for building or vehicle integrated photovoltaics rely on non-standard cell formats obtained by separation techniques. For either application, interdigitated back-contact (IBC) solar cells are one of the promising cell technologies due to their higher performance and more aesthetic appearance. Thus, a cell separation process, usually employing laser tools, is needed that splits the cells as partial cells are manufactured from full cells. However, this cell cutting also induces additional electrical losses. In this work, we analyze the performance of third cell mini-modules made of IBC cells in comparison to PERC cells as reference. Under standard test conditions (STC), an overall performance gain can only be found for the PERC cells, while current and recombination losses dominate the IBC mini-modules. Outdoor measurements under non-STC conditions reveal reduced performance gains under lower illumination. We show a detailed analysis regarding the performance differences of the IBC and PERC cell technologies at indoor STC and outdoor non-STC test conditions.
Funder
Qatar National Research Fund
Reference8 articles.
1. F. Kaule, et al., "Mechanical damage of half-cell cutting technologies in solar cells and module laminates" Silicon PV 2018: The 8th International Conference on Crystalline Silicon Photovoltaics, 2018, 020013, DOI: https://doi.org/10.1063/1.5049252.
2. S. Eiternick, et al., "Loss analysis for laser separated solar cells", Proceedings of the 4th International Conference on Crystalline Silicon Photovoltaics, p. 326-330, 2014, DOI: https://doi.org/10.1016/j.egypro.2014.08.094.
3. S. Krause, M. Meusel, S. Eiternick, M. Turek. "Laser cutting of solar cells by using the stress cut approach", 38th European Photovoltaic Solar Energy Conference and Exhibition, 2021, DOI: https://doi.org/10.4229/EUPVSEC20212021-2EO.3.3.
4. S.Y. Guo, et al., "Investigation of the short-circuit current increase for PV modules using halved silicon wafer solar cells", Solar Energy Materials and Solar Cells, 133, pp. 240-247, 2015, DOI: https://doi.org/10.1016/j.solmat.2014.11.012.
5. M. Mittag, et. al., "Techno-economic analysis of half-cell modules - the impact of half cells on module power and cost". 36th European Photovoltaic Solar Energy Conference and Exhibition, Marseille, France, 2019.