Affiliation:
1. Institute of Acoustics
2. National Center for Nanoscience and Technology
3. Tianjin University of Technology
4. Jilin University
Abstract
<div class="section abstract"><div class="htmlview paragraph">Accurate tire pressure monitoring system (TPMS) is of great practical importance and the reliability and safety of its power supply module has great concern. The piezoelectric-based surface acoustic wave (SAW) sensor is considered to have great potential in this field because of its passive, wireless and small size advantages. This paper presents the application of passive and wireless SAW sensors for real-time tire condition monitoring. The pressure sensitive structure is optimized and a three-resonator structure is also designed sensing temperature and pressure. Furthermore, a fast detection system is developed to realize high-speed signal acquisition. At last, experiments are executed and the SAW temperature and pressure sensor property is measured. The results show that the designed SAW sensor can realize real-time monitoring of tire condition; the temperature measurement range can reach -40~120°C with an accuracy of ±1°C; the pressure measurement range can reach 0~2MPa with an accuracy of 0.2MPa. This paper indicates the wireless and passive SAW temperature and pressure sensor system has the potential for application in real-time monitoring of tire condition.</div></div>
Subject
Artificial Intelligence,Mechanical Engineering,Fuel Technology,Automotive Engineering
Reference15 articles.
1. Sun , L. ,
Lu , D. , and
Li , B.
Analysis and Prediction of Tire Traction Properties for Different Inflation Pressures Based on Vertical Deflection Control Method SAE Int. J. Veh. Dyn., Stab., and NVH 5 3 2021 307 315 https://doi.org/10.4271/10-05-03-0021
2. Fan , X.B. ,
Deng , P. ,
Jiang , Y.
et al.
Road Friction Coefficient Real-Time Identification Based on the Tire Dynamic Friction Model Computer Aided Drafting, Design and Manufacturing 2013 https://doi.org/10.19583/j.1003-4951.2013.03.006
3. Xu , N. ,
Zhou , J. ,
Li , X. , and
Li , F.
Analysis of the Effect of Inflation Pressure on Vehicle Handling and Stability under Combined Slip Conditions Based on the UniTire Model SAE Int. J. Veh. Dyn., Stab., and NVH 5 3 2021 259 277 https://doi.org/10.4271/10-05-03-0018
4. Guo , K. ,
Chen , P. ,
Xu , N. ,
Yang , C.
et al.
Tire Side Force Characteristics with the Coupling Effect of Vertical Load and Inflation Pressure SAE Int. J. Veh. Dyn., Stab., and NVH 3 1 2019 19 30 https://doi.org/10.4271/10-03-01-0002
5. Matsuzaki , R. ,
Hiraoka , N. ,
Todoroki , A.
et al.
Optical 3D Deformation Measurement Utilizing Non-Planar Surface for the Development of an “Intelligent Tire” Journal of Solid Mechanics and Materials Engineering 4 4 2020 520 532 https://doi.org/10.1299/jmmp.4.520