Mechanical Stir Lap Welding of Ferrous and Nickel Coated Steel: The Significance of the Ferrous Coat-Reference-Cited by-同舟云学术

Mechanical Stir Lap Welding of Ferrous and Nickel Coated Steel: The Significance of the Ferrous Coat

Published:2024-02-23 Issue: Volume: Page:
ISSN:0148-7191
Container-title:SAE Technical Paper Series
language:
Short-container-title:

Author:

Sambath S.¹,Francis Xavier J.²,Jayabalakrishnan D.³,Suthan R.⁴,Zahir Hussain M.⁵

Affiliation:

1. Sri Venkateswaraa College of Technology, Mechanical Engineer

2. VIT Bhopal University, School of Mechanical Engineering

3. Chennai Institute of Technology, Department of Mechanical

4. Panimalar Engineering College Chennai, Department of Mechani

5. Rajalakshmi Engineering College, Department of Automobile

Abstract

<div class="section abstract"><div class="htmlview paragraph">The ferrous deuteroporphyrin cast Fe alloy and nickel-coated steel were lap welded successfully using the mechanical stir welding process. It was able to weld junctions with full strength and fracture on the base metal side of nickel-coated steel during the welding process, but ferrous alloy and nickel steel could not be welded together. It was proposed that the joining technique and function of the Ni coating be used in the friction stir lap welding of Ni-coated steel and aluminum alloy. The Ni coating improved both the weldability of iron and steel, resulting in the production of a Fe-Ni eutectic structure with a low melting point at the interface of the two materials. It is possible to successfully fuse steel and ferrous metals together.</div></div>

Publisher

SAE International

Reference16 articles.

1. Mypati , O. et al. Enhancement of Joint Strength in Friction Stir Lap Welding between AA6061 and AISI 304 by Adding Diffusive Coating Agents Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234 1-2 2020 204 217

2. Ren , D. and Liu , L. Interface Microstructure and Mechanical Properties of Arc Spot Welding Mg–Steel Dissimilar Joint with Cu Interlayer Materials & Design 59 2014 369 376

3. Das , T. , Rawal , S. , Panda , S.K. , and Paul , J. Resistance Spot-Welding of AISI-1008 Steel Joints with MWCNT Coating Interlayer Materials and Manufacturing Processes 36 4 2021 448 456

4. Gao , Y. et al. Interface Microstructural Control by Probe Length Adjustment in Friction Stir Welding of Titanium and Steel Lap Joint Materials & Design (1980-2015) 65 2015 17 23

5. Xie , J. et al. Microstructure and Mechanical Properties of Ultrasonic Spot Welding TiNi/Ti6Al4V Dissimilar Materials Using Pure Al Coating Journal of Manufacturing Processes 64 2021 473 480