Performance Investigation of Direct Injection Diesel Engine Characteristics Fuelled with Ternary Blends and Additive as Ethanol

Abstract

<div class="section abstract"><div class="htmlview paragraph">This study aims to examine the effectiveness and environmental impact of using linseed and jatropha oil as biodiesels in combination with diesel. These oils were transformed through a process called trans-esterification, and three blends of ethanol, biodiesel, and diesel were prepared in E10-B20, E15-B20, and E20-B20 configurations. Ethanol was added to improve the combustion properties. The performance of these novel blends was tested in a computerized single-cylinder water-cooled diesel engine to measure brake power and emissions. It was found that the ternary biodiesel mixtures produced lower NO_x and CO emissions than regular diesel fuel. In terms of performance, the E10-B20 blend reduced brake-specific fuel consumption and increased brake thermal efficiency by 6.1% to diesel. The E15-B20 blend showed a significant reduction of about 50% in unburnt hydrocarbons when compared to regular diesel at heavy load conditions. Additionally, the NOx value also decreased by 28.15% compared to the E15-B20 blend with regular diesel at heavy load conditions. These ternary blends have superior emission characteristics while maintaining comparable performance, making their use highly recommended.</div></div>