Affiliation:
1. Hebei University of Technology
2. South China University of Technology
3. Ningbo Tuopu Group Co., Ltd.
Abstract
<div class="section abstract"><div class="htmlview paragraph">To characterize the stress flow behavior of engineering plastic glass fiber reinforced polypropylene (PPGF) commonly used in automotive interior and exterior components, mechanical property is measured using a universal material testing machine and a servo-hydraulic tensile testing machine under quasi-static, high temperature, and high strain rate conditions. Stress versus strain curves of materials under different conditions are obtained. Based on the measured results, a new parameter identification method of the Johnson-Cook (J-C) constitutive model is proposed by considering the adiabatic temperature rise effect. Firstly, a material-level experiment method is carried out for glass fiber reinforced polypropylene (PPGF) materials, and the influence of wide strain rate range, and large temperature span on the material properties is studied from a macroscopic perspective. Then, the model parameters of the J-C constitutive model are identified based on the experimental data, and the influence of the adiabatic temperature rise effect under dynamic tensile conditions is considered. The parameters that can describe the performance of glass fiber-reinforced polypropylene (PPGF) materials are obtained by fitting. Finally, the three-dimensional model of high-speed tension is established using ABAQUS/Explicit finite element software, and calculation is carried out based on J-C model constitutive parameters obtained from the improved identification method. The results show that J-C constitutive model parameters obtained using the improved identification method can describe the stress flow behavior of PPGF materials under large strains, high strain rates, and high temperatures. A method for characterizing the mechanical properties of commonly used engineering plastics in automotive interior and exterior components under high strain rate conditions is established from both experimental and simulation aspects. This method may be used in actual engineering applications.</div></div>
Reference18 articles.
1. Gupta , M. and Singhal , V. Review on Materials for Making Lightweight Vehicles Materials Today: Proceedings 56 2022 868 872 https://doi.org/10.1016/j.matpr.2022.02.517
2. Olhan , S. , Khatkar , V. , and Behera , B. Textile-Based Natural Fiber-Reinforced Polymeric Composites in Automotive Lightweighting Journal of Materials Science 56 2021 18867 18910 https://doi.org/10.1007/s10853-021-06509-6
3. Li , H. , Qiao , P. , and Sun , R. Research and Development of Glass Fiber Reinforced Polypropylene Composite Parking Wedge China Plastics 36 12 2022 86 10.19491/j.issn.1001-9278.2022.12.013
4. Chen , Y. , Zhao , Y. , and Wang , H. Research Progress on Lightweight Design and Technology of Fiber Reinforced Plastics Components in Automobile Industry Cailiao Gongcheng J. Mater. Eng 48 2020 36 43
5. Ahmed , A. , Rahman , M.Z. , Ou , Y. et al. A Review on the Tensile Behavior of Fiber-Reinforced Polymer Composites under Varying Strain Rates and Temperatures Construction and Building Materials 294 5 2021 123565 https://doi.org/10.1016/j.conbuildmat.2021.123565